Difference between revisions of "Shelter"

Revision as of 19:44, 16 July 2009

¡¡¡SUPER NEW DELUXE REVISED SHADE STRUCTURE!!!!

It's rather amazing that the SketchUp-Average-Person-Model that looks like Carl actually slouches like Carl too...(Freakily enough he is my height too)

1. Wade & Sunny 10x12x6 KEY LIME

2. Carl & Heather 10x12x6 KEY LIME

3. Caleb & Sara 10x12x6 KEY LIME

4. Diana 12x10 x6’6” VERMILION

5. Vaughn 6x8x4’ 6” BRUISED ORANGE

6. Josh & Julie 10x10x5’5” HUNTER GREEN

7. Ossie? 10x10x5’5”* HUNTER GREEN -Outside Structure

8. Chris & Brigid 10x8x5* MUSTARD LEMON

9. Baby Yeti & Bro 10x8x5 MUSTARD LEMON

10. Shannon 7x7x5 AZURE

11. Jeff & Meghan 6x8x5* CERULEAN

12. Dante 8’7”x7’2”x5’ VIOLET

13. Ossie? 7x7x5* MAGENTA -Outside Structure

14. Juliette 7x9x5 LAVENDER

15. Matt & Katie 10x10x6'6" SALMON

• Need additional/updated measurements

(¡¡¡POSITIONS ARE NOT FINAL!!!)

Sub Committee on Tent Sheltering and Sun Deflection

• Caleb
• Carl
• Vaughn
• Josh

Quonset Hut Notes

Dimensions and such

Preliminary discussion have us building a hut of the following dimensions:

• 18' rib (two ribs make an arc)
• Arcs are 10' apart (actually should go with 8')
• 80' (ish) spine
• 2" PVC acquired in 20' lengths (maybe 3")
• 2 36'x40' tarps will provide the covering ($144 ea)
• Tarps have a grommet every 18" so we need 27 bungee balls per 40' edge
• 100 6" bungee balls cost $25 (we should get 200)

Initially we'll buy enough pvc to build two arcs, a spine and a side support (or 1x6 for that) and test build that for sturdiness

The Carl Edwards Guarantee: There's 0% chance of the monkey hut hurting anyone.

Material List

• RIBS 22 18' sections of sched 40 PVC (diameter to be determined- 1.5", 2", or 3"
• SPINE 4 20' sections of sched 40 PVC (2" or 3")
• SUPPORT 10 20' sections of sched 40 PV (1.5 or 2")
• 2 36'x40' heavy duty tarps
• 108 Bungee Balls
• 16 20' 2x6
• 10 rolls gaff tape
• 3 spine connectors

• SCHED 40 PVC PRICING (Lakwood Pipe & steel)
• 1.5" is $1.20/ft
• 2" is $1.50/ft
• 3" is $3.45/ft

• That works out to roughly...
• $850 just for the PVC if we go with mainly 1.5" (we will also need 2" pvc at 2' to use as sleeves to connect the ribs)
• They did say we could get a bulk discount, but how much I don't know yet.

• LAKEWOOD PIPE & STEEL
• 10027 Artesia Blvd.
• Bellflower, CA 90706
• (562) 633-1326 or (562) 867-9419 •

fax: (562) 867-2178 •

• info@lakewoodpipe.com
• website: www.seansloan.com

Other notes

-Wind typically comes from SSW direction

-Monkey Hut should be built perpendicular to the prevailing winds

-The only way to get decent candy-caned rebar is with a torch, in my experience. I also use smaller gauge rebar for the candy-caned part.

-Additionally, so as to minimize dust and wind as much as possible, I fasten the tarp down to the ground at every single gromment -- just as the tarp needs to be fastened to the ribs at every grommet with whatever you are using.

-highly recommend using 3' metal stakes instead of rebar -- don't bend, easier to pound in and get out, etc...

Examples:

http://images.tribe.net/tribe/upload/photo/df6/450/df6450a1-27bb-4d9e-ba3c-2aa0a3899fe3

http://tribes.tribe.net/shadegeeks/photos/5219fb4d-0900-43ee-b7de-541eebd917b3

http://images.tribe.net/tribe/upload/photo/d7c/453/d7c453c9-49dd-4ab3-8cda-923bff0f2ad0

http://tribes.tribe.net/shadegeeks/photos?page=1

ONLINE RESOURCES:

http://burnipedia.pbwiki.com/MonkeyHut

http://tribes.tribe.net/shadegeeks/thread/1355a62b-fd9f-48bb-805d-ebf1c763aeca (you really want this http://www.chromatest.net/Lovemonkey/ )

http://tribes.tribe.net/shadegeeks/thread/70afb3c5-133f-480d-9cdc-79bc550cbd00

http://www.catalogclearance.com/products/sku-BM1212__dept-146.html

 2008 Shelter stuff moved to Shelter2008